And you only have to ask: dmesg output is -

[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 – 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 – 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 – 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 – 000000001f780000 (usable)
[ 0.000000] BIOS-e820: 000000001f780000 – 000000001f790000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f790000 – 000000001f7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f7d0000 – 000000001f7de000 (reserved)
[ 0.000000] BIOS-e820: 000000001f7e0000 – 000000001f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 – 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 – 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 128896) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128896
[ 0.000000] HighMem 128896 -> 128896
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128896
[ 0.000000] On node 0 totalpages: 128896
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 123825 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FBEB0 checksum 0
[ 0.000000] ACPI: RSDP 000FBEB0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 1F780000, 0034 (r1 A M I OEMRSDT 8000716 MSFT 97)
[ 0.000000] ACPI: FACP 1F780200, 0081 (r1 A M I OEMFACP 8000716 MSFT 97)
[ 0.000000] ACPI: DSDT 1F780400, 5701 (r1 A0797 A0797000 0 INTL 20051117)
[ 0.000000] ACPI: FACS 1F790000, 0040
[ 0.000000] ACPI: APIC 1F780390, 0068 (r1 A M I OEMAPIC 8000716 MSFT 97)
[ 0.000000] ACPI: OEMB 1F790040, 0046 (r1 A M I AMI_OEM 8000716 MSFT 97)
[ 0.000000] ACPI: MCFG 1F785B10, 003C (r1 A M I OEMMCFG 8000716 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0×808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
[ 0.000000] Built 1 zonelists. Total pages: 127889
[ 0.000000] Kernel command line: root=UUID=87fac126-a44d-4b5f-85b5-6b00b66de98a ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore… done.
[ 0.000000] Enabling unmasked SIMD FPU exception support… done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 630.101 MHz processor.
[ 13.086005] Console: colour VGA+ 80×25
[ 13.086321] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.086854] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.118680] Memory: 499596k/515584k available (2015k kernel code, 15376k reserved, 916k data, 364k init, 0k highmem)
[ 13.118705] virtual kernel memory layout:
[ 13.118708] fixmap : 0xfff4d000 – 0xfffff000 ( 712 kB)
[ 13.118712] pkmap : 0xff800000 – 0xffc00000 (4096 kB)
[ 13.118716] vmalloc : 0xe0000000 – 0xff7fe000 ( 503 MB)
[ 13.118719] lowmem : 0xc0000000 – 0xdf780000 ( 503 MB)
[ 13.118723] .init : 0xc03e3000 – 0xc043e000 ( 364 kB)
[ 13.118726] .data : 0xc02f7d26 – 0xc03dce84 ( 916 kB)
[ 13.118730] .text : 0xc0100000 – 0xc02f7d26 (2015 kB)
[ 13.118739] Checking if this processor honours the WP bit even in supervisor mode… Ok.
[ 13.118831] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 13.198858] Calibrating delay using timer specific routine.. 1261.65 BogoMIPS (lpj=2523302)
[ 13.198916] Security Framework v1.0.0 initialized
[ 13.198934] SELinux: Disabled at boot.
[ 13.198970] Mount-cache hash table entries: 512
[ 13.199257] CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000000 00000000 00000000
[ 13.199288] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 13.199298] CPU: L2 cache: 512K
[ 13.199304] CPU: After all inits, caps: afe9fbbf 00000000 00000000 00002040 00000000 00000000 00000000
[ 13.199329] Compat vDSO mapped to ffffe000.
[ 13.199354] Checking ‘hlt’ instruction… OK.
[ 13.215108] SMP alternatives: switching to UP code
[ 13.215535] Freeing SMP alternatives: 11k freed
[ 13.216226] Early unpacking initramfs… done
[ 14.136355] ACPI: Core revision 20070126
[ 14.136541] ACPI: Looking for DSDT in initramfs… error, file /DSDT.aml not found.
[ 14.208864] CPU0: Intel(R) Celeron(R) M processor 900MHz stepping 06
[ 14.208922] Total of 1 processors activated (1261.65 BogoMIPS).
[ 14.209101] ENABLING IO-APIC IRQs
[ 14.209360] ..TIMER: vector=0×31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 14.354876] Brought up 1 CPUs
[ 14.355146] Booting paravirtualized kernel on bare hardware
[ 14.355273] Time: 18:44:45 Date: 09/30/107
[ 14.355331] NET: Registered protocol family 16
[ 14.355539] EISA bus registered
[ 14.355566] ACPI: bus type pci registered
[ 14.355867] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 14.355873] PCI: Using configuration type 1
[ 14.355878] Setting up standard PCI resources
[ 14.378620] ACPI: EC: Look up EC in DSDT
[ 14.379047] ACPI: EC: GPE=0×18, ports=0×66, 0×62
[ 14.414562] ACPI: Interpreter enabled
[ 14.414571] ACPI: (supports S0 S1 S3 S4 S5)
[ 14.414624] ACPI: Using IOAPIC for interrupt routing
[ 14.432338] ACPI: EC: GPE=0×18, ports=0×66, 0×62
[ 14.432687] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 14.432732] PCI: Probing PCI hardware (bus 00)
[ 14.433578] PCI: Enabled ICH6/i801 SMBus device
[ 14.433593] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 14.433601] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 14.434458] PCI: Transparent bridge – 0000:00:1e.0
[ 14.434558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 14.435062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 14.435295] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 14.435517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 14.445311] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 14.445658] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 14.445994] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 14.446328] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 14.446662] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 14.447022] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 14.447378] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 14.447717] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 14.448025] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 14.448056] pnp: PnP ACPI init
[ 14.448091] ACPI: bus type pnp registered
[ 14.453217] pnp: PnP ACPI: found 13 devices
[ 14.453224] ACPI: ACPI bus type pnp unregistered
[ 14.453236] PnPBIOS: Disabled by ACPI PNP
[ 14.453373] PCI: Using ACPI for IRQ routing
[ 14.453384] PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report
[ 14.466136] NET: Registered protocol family 8
[ 14.466142] NET: Registered protocol family 20
[ 14.466312] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 14.466338] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 14.466346] pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 14.466359] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 14.466368] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 14.466382] pnp: 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 14.466413] pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 14.466427] pnp: 00:0c: iomem range 0×0-0×9ffff could not be reserved
[ 14.466435] pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 14.466443] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 14.466451] pnp: 00:0c: iomem range 0×100000-0×1f7fffff could not be reserved
[ 14.466772] Time: tsc clocksource has been installed.
[ 14.497225] PCI: Bridge: 0000:00:1c.0
[ 14.497230] IO window: disabled.
[ 14.497239] MEM window: disabled.
[ 14.497246] PREFETCH window: disabled.
[ 14.497255] PCI: Bridge: 0000:00:1c.1
[ 14.497259] IO window: disabled.
[ 14.497269] MEM window: fbf00000-fbffffff
[ 14.497276] PREFETCH window: disabled.
[ 14.497284] PCI: Bridge: 0000:00:1c.2
[ 14.497288] IO window: disabled.
[ 14.497298] MEM window: f8000000-fbefffff
[ 14.497306] PREFETCH window: f0000000-f6ffffff
[ 14.497316] PCI: Bridge: 0000:00:1e.0
[ 14.497320] IO window: disabled.
[ 14.497328] MEM window: disabled.
[ 14.497334] PREFETCH window: disabled.
[ 14.497382] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.497399] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 14.497429] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.497440] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 14.497470] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 14.497481] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 14.497499] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 14.497530] NET: Registered protocol family 2
[ 14.534839] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 14.534929] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 14.535315] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 14.535593] TCP: Hash tables configured (established 16384 bind 16384)
[ 14.535600] TCP reno registered
[ 14.547122] checking if image is initramfs…Switched to high resolution mode on CPU 0
[ 15.418878] it is
[ 16.349862] Freeing initrd memory: 7064k freed
[ 16.350760] audit: initializing netlink socket (disabled)
[ 16.350792] audit(1193769885.664:1): initialized
[ 16.355950] VFS: Disk quotas dquot_6.5.1
[ 16.356094] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.356337] io scheduler noop registered
[ 16.356344] io scheduler anticipatory registered
[ 16.356349] io scheduler deadline registered
[ 16.356399] io scheduler cfq registered (default)
[ 16.356431] Boot video device is 0000:00:02.0
[ 16.356714] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.356775] assign_interrupt_mode Found MSI capability
[ 16.356783] Allocate Port Service[0000:00:1c.0:pcie00]
[ 16.356889] Allocate Port Service[0000:00:1c.0:pcie02]
[ 16.357038] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 16.357097] assign_interrupt_mode Found MSI capability
[ 16.357104] Allocate Port Service[0000:00:1c.1:pcie00]
[ 16.357191] Allocate Port Service[0000:00:1c.1:pcie02]
[ 16.357349] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 16.357409] assign_interrupt_mode Found MSI capability
[ 16.357416] Allocate Port Service[0000:00:1c.2:pcie00]
[ 16.357496] Allocate Port Service[0000:00:1c.2:pcie02]
[ 16.357812] isapnp: Scanning for PnP cards…
[ 16.711838] isapnp: No Plug & Play device found
[ 16.810533] Real Time Clock Driver v1.12ac
[ 16.810780] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 16.814247] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 16.814845] input: Macintosh mouse button emulation as /class/input/input0
[ 16.815049] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0×60,0×64 irq 1,12
[ 16.845679] serio: i8042 KBD port at 0×60,0×64 irq 1
[ 16.845692] serio: i8042 AUX port at 0×60,0×64 irq 12
[ 16.846090] mice: PS/2 mouse device common for all mice
[ 16.848142] EISA: Probing bus 0 at eisa.0
[ 16.848196] EISA: Detected 0 cards.
[ 16.848427] TCP cubic registered
[ 16.848466] NET: Registered protocol family 1
[ 16.848527] Using IPI No-Shortcut mode
[ 16.848922] Magic number: 11:872:747
[ 16.849592] Freeing unused kernel memory: 364k freed
[ 16.910518] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.378603] AppArmor: AppArmor initializedaudit(1193769887.664:2): type=1505 info=”AppArmor initialized” pid=1201
[ 18.400380] fuse init (API version 7.8)
[ 18.411152] Failure registering capabilities with primary security module.
[ 18.496968] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 18.496984] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 18.508737] ACPI: Thermal Zone [TZ00] (54 C)
[ 19.866375] usbcore: registered new interface driver usbfs
[ 19.866431] usbcore: registered new interface driver hub
[ 19.866482] usbcore: registered new device driver usb
[ 19.868593] USB Universal Host Controller Interface driver v3.0
[ 19.868735] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 19.868758] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 19.868767] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 19.869098] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 19.869145] uhci_hcd 0000:00:1d.0: irq 19, io base 0×0000e400
[ 19.869425] usb usb1: configuration #1 chosen from 1 choice
[ 19.869491] hub 1-0:1.0: USB hub found
[ 19.869505] hub 1-0:1.0: 2 ports detected
[ 19.970310] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 19.970334] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 19.970344] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 19.970399] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 19.970446] uhci_hcd 0000:00:1d.1: irq 20, io base 0×0000e480
[ 19.970684] usb usb2: configuration #1 chosen from 1 choice
[ 19.970758] hub 2-0:1.0: USB hub found
[ 19.970772] hub 2-0:1.0: 2 ports detected
[ 20.027331] SCSI subsystem initialized
[ 20.041176] libata version 2.21 loaded.
[ 20.074218] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 20.074242] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.074251] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.074317] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 20.074366] uhci_hcd 0000:00:1d.2: irq 18, io base 0×0000e800
[ 20.074589] usb usb3: configuration #1 chosen from 1 choice
[ 20.074661] hub 3-0:1.0: USB hub found
[ 20.074675] hub 3-0:1.0: 2 ports detected
[ 20.178242] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 20.178267] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 20.178276] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.178332] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 20.178384] uhci_hcd 0000:00:1d.3: irq 16, io base 0×0000e880
[ 20.178617] usb usb4: configuration #1 chosen from 1 choice
[ 20.178682] hub 4-0:1.0: USB hub found
[ 20.178696] hub 4-0:1.0: 2 ports detected
[ 20.290048] ata_piix 0000:00:1f.2: version 2.11
[ 20.290067] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 20.290114] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 20.290185] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 20.290351] scsi0 : ata_piix
[ 20.290479] scsi1 : ata_piix
[ 20.290740] ata1: SATA max UDMA/133 cmd 0×000101f0 ctl 0×000103f6 bmdma 0×0001ffa0 irq 14
[ 20.290749] ata2: PATA max UDMA/100 cmd 0×00010170 ctl 0×00010376 bmdma 0×0001ffa8 irq 15
[ 20.417952] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 20.585572] usb 3-1: configuration #1 chosen from 1 choice
[ 20.618233] ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66
[ 20.618245] ata2.00: 7815024 sectors, multi 0: LBA
[ 20.618259] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 20.634220] ata2.00: configured for UDMA/33
[ 20.641962] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
[ 20.687226] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
[ 20.687273] sd 1:0:0:0: [sda] Write Protect is off
[ 20.687280] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.687317] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn’t support DPO or FUA
[ 20.687451] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
[ 20.687474] sd 1:0:0:0: [sda] Write Protect is off
[ 20.687480] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.687514] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn’t support DPO or FUA
[ 20.687526] sda: sda1 sda2
[ 20.723417] sd 1:0:0:0: [sda] Attached SCSI disk
[ 20.733365] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 7.492000] Marking TSC unstable due to: possible TSC halt in C2.
[ 7.496000] Time: acpi_pm clocksource has been installed.
[ 7.524000] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 7.644000] Attempting manual resume
[ 7.644000] swsusp: Resume From Partition 8:5
[ 7.644000] PM: Checking swsusp image.
[ 7.648000] PM: Resume from disk failed.
[ 7.676000] usb 4-2: configuration #1 chosen from 1 choice
[ 7.680000] usbcore: registered new interface driver libusual
[ 7.756000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 7.756000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 7.760000] Initializing USB Mass Storage driver…
[ 7.760000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 7.760000] usbcore: registered new interface driver usb-storage
[ 7.760000] USB Mass Storage support registered.
[ 7.760000] usb-storage: device found at 2
[ 7.760000] usb-storage: waiting for device to settle before scanning
[ 7.784000] kjournald starting. Commit interval 5 seconds
[ 7.784000] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.192000] Clocksource tsc unstable (delta = -141424871 ns)
[ 12.760000] usb-storage: device scan complete
[ 12.764000] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 12.768000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 12.768000] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 16.348000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.440000] agpgart: Detected an Intel 915GM Chipset.
[ 16.440000] agpgart: Detected 7932K stolen memory.
[ 16.468000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 16.488000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.632000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.868000] iTCO_vendor_support: vendor-support=0
[ 19.548000] Attansic(R) L2 Ethernet Network Driver – version 1.0.40.2
[ 19.548000] Copyright (c) 2006 Attansic Corporation.
[ 19.552000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 19.552000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 19.628000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 20.468000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0×180b1, caps: 0xa04713/0×200000
[ 20.556000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 20.564000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0×0860)
[ 20.564000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.580000] input: PC Speaker as /class/input/input3
[ 20.584000] intel_rng: FWH not detected
[ 20.788000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.788000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 20.988000] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS…
[ 21.280000] Linux video capture interface: v2.00
[ 21.584000] uvcvideo: Found UVC 1.00 device (eb1a:2761)
[ 21.608000] usbcore: registered new interface driver uvcvideo
[ 21.608000] USB Video Class driver (v0.1.0)
[ 22.364000] lp: driver loaded but no devices found
[ 22.432000] ndiswrapper version 1.45 loaded (smp=yes)
[ 22.504000] ndiswrapper: driver net5211 (,05/02/2007,5.3.0.45) loaded
[ 22.504000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 22.504000] ndiswrapper (ZwClose:2247): closing handle 0xd8e5d528 not implemented
[ 22.504000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 22.916000] ndiswrapper: using IRQ 18
[ 23.124000] wlan0: ethernet device 00:15:af:35:e7:bc using serialized NDIS driver: net5211, version: 0×50003, NDIS version: 0×501, vendor: ”, 168C:001C.5.conf
[ 23.132000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 23.144000] usbcore: registered new interface driver ndiswrapper
[ 23.224000] Adding 224868k swap on /dev/sda5. Priority:-1 extents:1 across:224868k
[ 23.400000] EXT3 FS on sda1, internal journal
[ 24.984000] ACPI: Battery Slot [BAT0] (battery present)
[ 25.244000] input: Power Button (FF) as /class/input/input4
[ 25.244000] ACPI: Power Button (FF) [PWRF]
[ 25.284000] input: Lid Switch as /class/input/input5
[ 25.284000] ACPI: Lid Switch [LID]
[ 25.304000] input: Sleep Button (CM) as /class/input/input6
[ 25.304000] ACPI: Sleep Button (CM) [SLPB]
[ 25.316000] input: Power Button (CM) as /class/input/input7
[ 25.316000] ACPI: Power Button (CM) [PWRB]
[ 25.832000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 25.952000] No dock devices found.
[ 26.196000] ACPI: AC Adapter [AC0] (off-line)
[ 28.360000] ppdev: user-space parallel port driver
[ 29.316000] audit(1193769912.832:3): type=1503 operation=”inode_permission” requested_mask=”a” denied_mask=”a” name=”/dev/tty” pid=4715 profile=”/usr/sbin/cupsd”
[ 29.420000] apm: BIOS version 1.2 Flags 0×03 (Driver version 1.16ac)
[ 29.420000] apm: overridden by ACPI.
[ 30.028000] Failure registering capabilities with primary security module.
[ 30.252000] Bluetooth: Core ver 2.11
[ 30.252000] NET: Registered protocol family 31
[ 30.252000] Bluetooth: HCI device and connection manager initialized
[ 30.252000] Bluetooth: HCI socket layer initialized
[ 30.280000] Bluetooth: L2CAP ver 2.8
[ 30.280000] Bluetooth: L2CAP socket layer initialized
[ 30.360000] Bluetooth: RFCOMM socket layer initialized
[ 30.360000] Bluetooth: RFCOMM TTY layer initialized
[ 30.360000] Bluetooth: RFCOMM ver 1.8
[ 34.268000] [drm] Initialized drm 1.1.0 20060810
[ 34.280000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.284000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 70.456000] NET: Registered protocol family 17

and lspci…

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)
03:00.0 Ethernet controller: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter (rev a0)